Air Oasis NANO INDUCT Sanifier Owner'S Manual Download Page 3

Important Safety Instructions

Table of Contents

When operating any electrical appliance, basic precautions should always be fol-

lowed for safety. 

 RISK OF FIRE, ELECTRIC SHOCK, OR INJURY

•  Carefully read the entire contents of this manual.

•  Do not use outdoors, in moist areas or on wet surfaces.

•  Do not use the unit in areas of extreme heat or in the pres-

ence of flammable gas.

•  Do not allow any foreign objects to enter the ballast cooling 

vents. 

•  Do not attempt to service or repair the unit yourself. Any at-

tempt to repair the unit yourself could cause serious injury 

and will void the warranty.

•  Do not handle the plug or appliance with wet hands.

•  Do not pull on power cord to unplug. To unplug grasp the plug, not the cord.

•  Do not use with damaged power cord or plug. If appliance is not working prop-

erly, has been dropped, damaged, left outdoors, or dropped into water, call a 

customer service representative at 1-800-936-1764.

WARNING: RISK OF ELECTRICAL SHOCK. CAN CAUSE INJURY OR DEATH. 

UNPLUG OR DISCONNECT UNIT FROM POWER SUPPLY BEFORE SERVIC-

ING.

Store and transport -4˚ F ~ 180˚ F, humidity 10% ~ 90% (Non Condensing).
Do not operate unit in ambient temperatures above 150˚ F.
KEEP OUT OF REACH OF CHILDREN
Only use the power adapters included with the purification system.
WARNING: UV LIGHT HAZARD. 

Harmful to skin and eyes. Can cause 

temporary or permanent loss of vi-

sion. Never look at the lamp while 

illuminated. To prevent exposure to 

ultraviolet light, be sure the power is 

disconnected until installation is com-

pleted and before servicing.  

UV lamps contain Hg (Mercury). 

High or long term exposure to Hg can lead to serious health risks. UV lamps should 

be disposed of according to disposal laws in your area. UV lamps should never 

be disposed via standard waste receptacles. They often break when thrown into a 

dumpster, trash can or compactor, or when they end up in a landfill or incinerator. 

Learn  more  about  proper  disposal  methods  and  find  disposal  centers  at  www.

earth911.org.

Never  touch  UV  lamp  with  bare  hands.  Oils  from  your  skin  can  create  hot 

spots causing UV lamp to break when illuminated.

Never remove the outer housing of any components.

Cooling Vents

WARNING

OPTICAL RADIATION EXPOSURE HAZARD

DO NOT ATTEMPT TO OPERATE UNIT 

WITHOUT PROPERLY INSTALLING UNIT 

FIRST.

PERMANENT EYE DAMAGE MAY RESULT.

1

Summary of Contents for NANO INDUCT Sanifier













Reviews: