indicator light illuminates) and use
⑦
pads to settle the Auto Stop.
initialize Auto Start:
Press the timer button
⑥
two times (the "timer
on" indicator light illuminates) and use
⑦
pads to settle the Auto Start.
The selected time will register in 5 seconds
and the system will automatically revert back
to display the previous humidity setting.
When the Auto start & Auto stop times are set,
within the same program sequence, "timer on-
off" indicator lights illuminate identifying both
"on" and "off" times are now programmed.
CAUTioN: Turning the unit oN or oFF at any time
or adjusting the timer setting to 0.0 with
⑦
pads will cancel the Auto Start/Stop function.
When LED display window
⑨
displays the
code of P2, the Auto Start/Stop function will
also be cancelled.
•
Auto-restart
if the unit breaks off unexpectedly due to
the power cut, it will restart with the previous
function setting automatically when the
power resumes.
ATTENTioN : After
Kompressor
has stopped,
it can not be restart operation in the first 3
minutes. This is to protect the unit. operation
will automatically start after 3 minutes.
•
Auto defrost
When frost builds up on the evaporator coils,
the compressor will cycle off and the fan will
continue to run until the frost disappears.
reMovINg THe CoLLeCTeD WATer
Kompressor
features three ways to remove
collected water :
1. using the water tank
•
When the unit is off,if the bucket is full, the
Full indicator
⑩
will light.
•
Unplug the unit.
•
Pull out the water tank and throw the
water away.
•
Replace the water tank.
CAUTioN : When the water tank is full, the units
switches off.
Slowly pull out the bucket. Grip the left and right
handles securely, and carefully pull out straight
so water does not spill. When you remove the
bucket, do not touch any parts inside of the
unit. Doing so may damage the product.
if the pump hose drops when you remove the
bucket (see Figure .1),you must reinstall the
pump hose properly to the unit before replace
the bucket into the unit (see Fig.2).
if the bucket is removed, the compressor and the
fan turn off, then the unit will beep 8 times and the
digital display shows "Eb".
2. using the continuous draining
Continuous draining allows to drain the
collected water directly to a water outlet, by
gravity only and without using the water tank.
•
Remove the plastic cover from the back
1. Emptying the water tank
Retrait du réservoir
Vidange et replacement du
réservoir
Pompe détachée
2. Repositioning the drain pump
Pompe replacée
14
Downloaded from www.vandenborre.be
