9
GRAPH 1
ENGLISH • ENGLISH • ENGLISH • ENGLISH • ENGLISH • ENGLISH • ENGLISH • ENGLISH • ENGLISH • ENGLISH • ENGLISH • ENGLISH •
If you have failed to solve the problem after performing the above checks and the device still does not work, have it checked by an
authorized service centre.
6
-
TECHNICAL
DATA
Supply voltage
See rating plate on the device
Operation
Continuous
Maximum air pressure
2.5 bar
Maximum air flow
12 l/min
Dynamic air flow with nebuliser
6 l/min
Maximum input
115 VA
Protection fuse
F1,6 A
Dimensions of the basic unit
190x130x120H mm
Weight of the basic unit
1,5 kg
Noise level at 1 m
59,3 dBA (to UNI EN 13544 -1)
Minimum nebuliser filling volume
1ml
Maximum nebuliser filling volume
8 ml
Aerosol output with nebuliser (*)
0.75 ml (**)
Minimum aerosol output rate with nebuliser (**)
0.30 ml/min (**)
MMAD with nebuliser, graph 1 (*) (***)
1.9 μm (**)
The MMAD values shown are measured using a MACH 2 API AEROSIZER.
The y-axis of the graphs represent the percentage of volume of atomised solution with sizes lower than the corresponding dimensional
value expressed in μm on the x-axis.
(*) For a quantity of 2 ml.
(**) The values shown refer to the use of physiological solution (0.9% NaCl) and may vary with the drug used. The values given do not
apply to drugs in suspension or high-viscosity drugs. The manufacturer of the drug can provide the necessary details.
(***) 50% by volume of the atomised particles are less than the MMAD (Median Mass Aerodynamic Diameter). This value is indicative of
the nebuliser’s ability to produce particles suitable for a specific therapeutic treatment.
7 - DISPOSING OF THE APPARATUS AND ITS COMPONENTS
At the end of their useful life, the device and its components must be disposed of in accordance with the current regulations and
environmental laws. If no legal obligations exist, the various materials must be sorted and disposed of separately.
The table below shows the materials of which the various components are made.
None of the materials used contains phthalates or traces of natural Latex.
COMPONENT
MATERIAL
Basic unit (1)
Waste from Electric and Electronic Equipment (WEEE)
External casing of the basic unit
ABS/Polystyrene
Nebuliser (9, 11)
Polycarbonate
Atomiser (10)
Nylon
Mask body (12) and fitting (13)
Silicone and polycarbonate
Mouthpiece (14)
Polycarbonate
Connecting tube (15)
Non-toxic PVC (phthalate-free polyvinyl chloride)
Box
Cardboard
Instructions
Paper
%
