Air Lift RideControl 59570, Installation Manual

Page: 10 / 24

8
MN-962
ASSEMBLING THE AIR SPRING ASSEMBLY
1. Install the fitting (M) onto the top port of the air spring (C) (fig. 12) finger-tight plus
1-1/2 turns. Repeat for both air springs.
2. Install the air springs (C) to the lower brackets (B) using the 1/2” bolt (F) and flat
washer (H) (figs. 1 and 13). Leave loose at this time.
3. Set the assemblies onto the leaf spring making sure the upper fitting and thread post
on the air spring goes through the slot in the upper bracket. The flange on the lower
bracket points to the outside (tire-side) of the vehicle (fig. 14).
fig. 12
fig. 13
fig. 14
Loosely attach
the spring (C) to
the lower bracket
(B) with the 1/2”
bolt (F) and flat
washer (H).
F
H
Make sure the
fitting and thread
post go through
the slot in the
upper bracket.
Make sure the
flange on the
lower bracket
points to the
outside (tire-
side) of the
vehicle.
RideControl