Air Lift RideControl 59570, Installation Manual

Page: 8 / 24

6
MN-962
4. With the U-bolts into position, set the left (A1) and right (A2) upper bracket against
the frame while aligning the U-bolts (fig. 7) through the mounting holes in the
bracket (fig. 8).
fig. 5
fig. 6
fig. 7
fig. 8
Figure 5 shows
U-bolt (D) being
installed on the
inside of the left
(driver-side) frame
section on the
front side of where
the jounce bumper
is mounted.
CAUTION: DO
NOT PINCH THE
BRAKE LINES
AND WIRING
ON THE INSIDE
OF THE LEFT
(DRIVER SIDE)
FRAME . U-BOLTS
MUST BE
BETWEEN THESE
COMPONENTS
AND THE FRAME .
Figure 6 shows
the U-bolts in the
proper location,
under the brake
lines and wiring
on the inside of
the left side frame
(driver-side).
D
Figure 7 shows
the left (driver-
side) outside
frame with
the U-bolts in
position.
Figure 8 shows
the left (driver-
side) outside
frame with the
upper bracket
over the
U-bolts and in
position.
RideControl