manualshive.com logo in svg

AIR DRYER SUPPLIER CATR-1600-200, Instruction Manual, Page: 50 / 57

Share
Download
AIR DRYER SUPPLIER CATR-1600-200 Instruction Manual Download Page 50

Material Safety Data Sheet 

3/16" Activated Alumina Desiccant 

Revision date : 2014/06/19 

Page 8 of 8 

Version: 6.0 

(53732394/SDS_GEN_US/EN) 

16. Other  Information 

MSDS Prepared on: 2014/06/19 

We support worldwide Responsible Care® initiatives. We value the health and safety of our employees, customers, 
suppliers and neighbors, and the protection of the environment. Our commitment to Responsible Care is integral to 
conducting our business and operating our facilities in a safe and environmentally responsible fashion, supporting 
our customers and suppliers in ensuring the safe and environmentally sound handling of our products, and 
minimizing the impact of our operations on society and the environment during production, storage, transport, use 
and disposal of our products. 

IMPORTANT: WHILE THE DESCRIPTIONS, DESIGNS, DATA AND INFORMATION CONTAINED HEREIN ARE 
PRESENTED IN GOOD FAITH AND BELIEVED TO BE ACCURATE , IT IS PROVIDED FOR YOUR GUIDANCE 
ONLY. BECAUSE MANY FACTORS MAY AFFECT PROCESSING OR APPLICATION/USE, WE RECOMMEND 
THAT YOU MAKE TESTS TO DETERMINE THE SUITABILITY OF A PRODUCT FOR YOUR PARTICULAR 
PURPOSE PRIOR TO USE. NO WARRANTIES OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING 
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE MADE 
REGARDING PRODUCTS DESCRIBED OR DESIGNS, DATA OR INFORMATION SET FORTH, OR THAT THE 
PRODUCTS, DESIGNS, DATA OR INFORMATION MAY BE USED WITHOUT INFRINGING THE INTELLECTUAL 
PROPERTY RIGHTS OF OTHERS. IN NO CASE SHALL THE DESCRIPTIONS, INFORMATION, DATA OR 
DESIGNS PROVIDED BE CONSIDERED A PART OF OUR TERMS AND CONDITIONS OF SALE. FURTHER, 
YOU EXPRESSLY UNDERSTAND AND AGREE THAT THE DESCRIPTIONS, DESIGNS, DATA, AND 
INFORMATION FURNISHED BY OUR COMPANY HEREUNDER ARE GIVEN GRATIS AND WE ASSUME NO 
OBLIGATION OR LIABILITY FOR THE DESCRIPTION, DESIGNS, DATA AND INFORMATION GIVEN OR 
RESULTS OBTAINED, ALL SUCH BEING GIVEN AND ACCEPTED AT YOUR RISK. 

END OF DATA SHEET

 

Summary of Contents for CATR-1600-200


























































Reviews:

No comments