manualshive.com logo in svg

Air-Care Bio Cart HEPA-UVC 13 LT, User Manual

Share
Download
Air-Care Bio Cart HEPA-UVC 13 LT User Manual Download Page 24

OPERATION Continued

If power tools are required, plug them in to the power outlet located on the control 

panel.

KEEP THE AIR SCRUBBER RUNNING DURING THE ENTIRE PROJECT AND EVEN WHEN 

YOU EXIT THE Bio CART. This will maintain Negative Pressure in the Bio Cart HEPA-UVC 

13LT and prevent any airborne particles from escaping into the area around the cart.

Once the job is complete, leave the air scrubber on while the ladder is lowered and 

secured with the strap.  You can then safely lower the bellows.  

Remove any protective clothing that may be contaminated with debris and store in a 

plastic bag inside the cart.

Step outside the Bio Cart HEPA-UVC 13LT and close the door securely. It can be locked 

using the key provided with your Bio Cart HEPA-UVC 13LT.

If required, install the top cover of the Bio Cart HEPA-UVC 13LT and secure with the 

velcro straps before it is moved to the next work area. 

This Top is NOT durable 

enough for transporting the Bio Cart HEPA-UVC 13LT in an open trailer or truck at 

highway speeds!

Unplug the 40 ft retractable cord and let it wind back up into the Bio Cart HEPA-UVC 

13LT.

Unlock the wheel brakes and carefully move the Bio Cart HEPA-UVC 13LT to the next 

work area.  You can utilize the tablet camera feature when moving your Bio Cart 

HEPA-UVC 13LT.  

Air-Care | 800.322.9919 | [email protected] 

24

June 2018 - Part # FG0179   

Made in the USA

Summary of Contents for Bio Cart HEPA-UVC 13 LT


































Reviews:

No comments

Brands by name

Popular brands

Load more brands