Air-Care Bio Cart HEPA-UVC 13 LT, User Manual

Page: 20 / 33

CAMERA/TABLET/LIGHTS
Turn on the tablet and touch the Bio Cart App to begin tablet operation.
You will see the image on the screen and the controls along the bottom. The right
side of the screen displays the air changes per hour (ACH) of the air scrubber by
measuring the pressure drop through the HEPA filter system.
The bellows and lift motors can also be operated from the touch screen on the
tablet. Pressing the UP button raises the bellows as long as it is held, and it stops
immediately when released. DO NOT HOLD THE BUTTON after it reaches the ceiling
or when it is fully down, this will put strain on the motors. There is a limit circuit on
the motors to reduce the torque once it has contacted a solid surface.
The tablet should be mounted on the window brackets for observing the camera
when the Bio Cart HEPA-UVC 13LT is being moved, and a clamp with articulated arm
to hold it is just above the control panel during other operations.
The operational test is complete. THE UVC switches should be left in the ON position
and the Pre-Filter must be re- installed.
Air-Care | 800.322.9919 | cs@air-care.com 20
June 2018 - Part # FG0179
Made in the USA