Air Burners, Inc.
BurnBoss Series Air Curtain Burner (Kubota Z482
-
E3 Engine)
OPERATING MANUAL
(Vers. 08.08.2017)
Page 14 of 27
HOW TO SET UP THE MACHINE
C) STARTING (Kubota Z482)
Turn the speed control knob clockwise to en-
sure engine speed is at idle.
Close battery disconnect switch located on
the battery terminal, if option is installed.
If needed, turn key switch counterclockwise to
the PREHEAT position for a few seconds.
Turn the key switch clockwise to the RUN po-
sition.
The gauges will register to confirm that power
is supplied to the panel.
Start the engine by turning the key switch all
the way clockwise to
“
START
”,
then release
key switch, and warm up the engine at idle
speed of 1,000 RPM for 5 to 10 minutes.
Shut the engine down to prepare for loading
and lighting (see pages 16
-
18 for loading and
lighting instructions).
The fan is direct drive,
so leaving the engine running during light-
ing will make it more difficult to light.
Once running, the engine speed may be var-
ied as required by turning the speed control
knob clockwise to decrease, counter clock-
wise to increase.
The maximum engine speed is governed to
provide the correct amount of air flow.
Battery Disconnect
(Optional)
Control Panel
Temp
Tach
Hours
Fuel
Oil
