G. Changelog
air
avionics
G.6 AT1 Software Version 3
G.6.1 Component Versions
Main Module Software Version:
2
WiFi Module Software Version:
2
FLARM Module Software Version:
6.62
1090MHz Receiver Module Software Version:
38
G.6.2 Changes Since Version 2
Main Module Software
•
Added GDL90 data output.
•
Added voice functions for alarm and error announcement via audio output.
•
Added functionality (input pins and serial commands) to acknowledge errors and
alarms.
•
Added FLARMTRAFFIC and ADSBTRAFFIC filter settings to all available data output
channels.
•
Added additional scenarios to GPS simulator, e.g. to simulate bad GPS reception.
•
Added simple port config items, to allow easy selection of specific device (e.g.
’FLARM’).
•
Use ONGND switch to force FLARM flight state.
•
Disable FLARM or 1090 receiver maintenance functions while AT-1 is in simulator
mode.
•
Fixed minor bugs in the ARINC429 output. Deactivated TCASActive flag if no GPS
track is available.
•
Removed NONONDIRALARM digital input function.
•
Added command to trigger an audio test sound.
•
Added more detailed titles to info logfile. Reordered config items in logfile to be
consistent to configuration webpage.
WiFi Module Software
•
Added UDP broadcast for GDL90 data.
•
Improved loading speed of config website.
•
Removed separate streaming website to improve the stability of the integrated web
server.
•
Show FLARM radio-id type and FLARM obstacle db status on config website.
•
Added button to test audio out functionality to config websites Audio Out section.
•
Added button to perform a factory reset to the expert-mode configuration webpage.
104
AT-1
·
Installation Manual
·
rev. 4.0
·
2020/01/09
