background image

FCC Compliance Statement:

This device complies with Part 15 of the FCC Rules. Operation is 

subjected to the following two conditions: (1) this device may not cause 

harmful interference, and (2) this device must accept any interference 

received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with limits for a 

Class B digital device, pursuant to Part 15 of the FCC rules. These limits 

are designed to provide reasonable protection against harmful interference in residential 

installations. This equipment generates, uses, and can radiate radio frequency energy, and if 

not installed and used in accordance with the instructions, may cause harmful interference to 

radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this 

equipment does cause interference to radio or television equipment reception, which can be 

determined by turning the equipment off and on, the user is encouraged to try to correct the 

interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Move the equipment away from the receiver.

-Plug the equipment into an outlet on a circuit different from that to which the receiver is 

 connected.

-Consult the dealer or an experienced radio/television technician for additional suggestions.

You are cautioned that any change or modifications to the equipment not expressly approved 

by the party responsible for compliance could void Your authority to operate such equipment.

If the time arises to throw away your product, please 

recycle all the components possible. 

Batteries and rechargeable batteries are not to be 

disposed in your domestic waste! Please recycle 

them at your local recycling point. 

Together we can help to protect the environment. 

Welcome:

Dear user, thanks for purchasing this product.

Much investment in time and effort has gone into its development, and it is our hope 

that it will give you many years of trouble-free service.

Safety Notice:

1. Do not drop, puncture or disassemble the camera; otherwise the warranty will be voided.

2. Avoid all contact with water, and dry hands before using.

3. Do not expose the camera to high temperature or leave it in direct sunlight. Doing so may

    damage the camera.

4. Use the camera with care. Avoid pressing hard on the camera body.

5. For your own safety, avoid using the camera when there is a storm or lightning.

6. Do not use batteries of different specifications. Doing so may lead to the potential for serious

    damage.

7. Remove the battery during long periods between usage, as a deteriorated battery may affect    

    the functionality of the camera.

8. Remove the battery if it shows signs of leaking or distortion.

9. Use only the accessories supplied by the manufacturer.

10. Keep the camera out of the reach of infants.

11. Risk of explosion if battery is replaced by an incorrect type.

12. Dispose of used batteries according to the instructions.

Summary of Contents for Action A-V5Z5S




















Reviews: