- 6 -
内内内内
Français
1. Parallel or jacketed 2-conductor, mid-capacitance non-
shielded cable is recommended. PVC jacket with PE
(polyethylene) insulated conductors is recommended.
2. Never use individual conductors, twisted pair cable or
coaxial cable.
3. When using a cable with unused conductors, it is
suggested to terminate both ends of unused pair(s) with a
120Ω resistor.
内内内内
Deutsch
1. Parallel or jacketed 2-conductor, mid-capacitance non-
shielded cable is recommended. PVC jacket with PE
(polyethylene) insulated conductors is recommended.
2. Never use individual conductors, twisted pair cable or
coaxial cable.
3. When using a cable with unused conductors, it is
suggested to terminate both ends of unused pair(s) with a
120Ω resistor.
内内内内
Español
1. Parallel or jacketed 2-conductor, mid-capacitance non-
shielded cable is recommended. PVC jacket with PE
(polyethylene) insulated conductors is recommended.
2. Never use individual conductors, twisted pair cable or
coaxial cable.
3. When using a cable with unused conductors, it is
suggested to terminate both ends of unused pair(s) with a
120Ω resistor.
内内内内
Nederlands
1. Parallel or jacketed 2-conductor, mid-capacitance non-
shielded cable is recommended. PVC jacket with PE
(polyethylene) insulated conductors is recommended.
2. Never use individual conductors, twisted pair cable or
coaxial cable.
3. When using a cable with unused conductors, it is
suggested to terminate both ends of unused pair(s) with a
120Ω resistor.
2-4
Wiring distance
通通通通
通通通通
通通通通
通通通通
D
JF-1MD
JF-1FD
PS
JF-DA
JF-DV
JF-DVF
PS-1820
PS-1810
IER-2
M
S
A
B
C
SP
JF-1SD
AIPHONE
JF-1MD
AIPHONE
JF-1FD
Ø 0,65 mm
22AWG
Ø 1,0 mm
18AWG
A
50 m
165'
100 m
330'
B
5 m
16'
10 m
33'
C
75 m
245'
150 m
490'
3
MOUNTING
MONTAGE
MONTAGE
MONTAJE
MONTAGE
3-1
83,5 mm
(3-5/16")
[3]
[2]
[1]
[4]
83,5 mm
(3-5/16")
[3]
[2]
PS-1810DIN
JF-1MD
JF-1FD
PS-1820
AIPHONE
JF-1MD
[5]
1
2
9mm
(3/8")
Mounting
English
[1] Mounting screws (x2)
[2] Mounting bracket
[3] 1-gang box
[4] Din rail
1. Press the RELEASE button (to insert or remove the wire).
2. Insert the cable into the terminal.
[5] When a 1-gang box is not installed, the cable can be
surface-run to the top or bottom of the unit. Cut the cable
inlet to allow passage of the wiring into the unit.