6
Specifications
Items Particulars
Power Source
AC100~240V
±
10% adaptable
Power
Consumption
40VA
Outer Dimension 210 (W) x 100 (H) x 200 (D) mm
Weight
Connector Type
：
about 2.03 kg
Pressure Sensor On-board Type: about 2.05 kg
2-digit digital display
Indication
：
Remaining count number (“WORK No.” at the time of setting
value inputting)
Display
LCD 20 characters×
４
lines
Indication
：
Setting value, pressure value, alarm message, judgment,
fastening time, pulse number
Lamp
Fastening number judgment: OK (green)/NOK (red), Size 14x14
Buzzer
High-tone electronic buzzer. Buzzer currently used in UTM-1100 is
interchangeable.
Front Panel Key Switch
Setting Method
PC (use our original software)
Terminal Block
Input: 6 points, Output: 5 points
20P detachable type
（
Sato Parts ML-100-AS-20
）
Pressure Signal
Input
Connection with the pressure sensor incorporated in Tool via the
connector at the back allows power supply and analog signal input.
Analog Output
Plug Size: JISC6560 (small, single-head plug
φ
3.5x15)
Major Functions
Fastening number control
Fastening time control
Pulse number control
※１
Various judgments
Others
Two types of controllers are available, one is pressure sensor
incorporated type and the other is connector incorporated type as follows:
Pressure Sensor Incorporated Type : UTM-1500 (PS)
Connector Incorporated Type : UTM-1500 (CN)
※１：
For pulse detection, prepare a 30cm-long or shorter TM Signal hose to connect Tool and
Pressure Sensor.
There are times when pulse detection is impossible in the case that a less pneumatic
pressure fluctuation type tool (like a small tool) is in use and/or depending on the work
conditions.
