BILL OF MATERIALS
PART NUMBER
QTY DESCRIPTION
UEC-4800
0
Torque Controller
UEC-4800EPL-UPGRAD
1
Kit
1. Find the TB1 connector, unplug it, and cut the wire tie holding it in place.
2. Install the two green w/yellow striped wires from power interface cable to the ground rail.
3. Connect the power interface cable to the TB1 connector.
4. Connect the power cable from the UEC to the plug on the PCB of the power interface cable.
5. Move the board to the UEC back and install the four screws to secure it in place.
WIRING THE TOP COVER TO THE UEC-4800
1
2
INTERFACE
CABLE
5
WEAR ESD GROUND STRAP WHEN HANDLING PCB
3
POWER
INTERFACE CABLE
4
POWER
INTERFACE CABLE
Summary of Contents for UEC-4800EPL
Page 1: ...UEC 4800EPL Upgrade Kit INSTRUCTION MANUAL ...
Page 2: ......
