18
Loading and unloading batteries on to battery changer
Charging the battery:
1
Plug charger power plug into a socket. The power lamp should light.
2
Load battery pack into charger.
①
Align battery in charger using alignment marks and place battery onto
charger dock.
②
Slide battery pack forward in the direction of the arrow.
3
Unload battery pack after charging, and unplug charger from socket.
When to replace the battery pack
Depending on work conditions, the battery pack will perform approximately
500 charge/discharge cycles. It is time to replace the battery pack with a
new one when the length of charge life decreases to half despite an initial
full charge.
Battery pack storage
Store lithium-ion battery packs without charge after use. Remove any
foreign matter from terminals. Cover battery using pack cover, which helps
avoid short circuits and protects terminals from debris. Do not store batteries
in a hot or humid place.
Battery pack recycling
The Lithium-ion battery pack is recyclable, and should not be mixed with
general household waste. Return used battery packs to the distributor who
sold them to you. Cover terminals of the battery pack with insulating tape to
avoid short circuit for return shipment.
Summary of Contents for BP-T40
Page 21: ...21 Exploded View Parts ...
