3
DANGER
1. Wear ear protection if the noise
level is higher than 85dB(A) at
the worksite. Wear impact-
resistant eye protector during
operation.
2. Do not overwork the tool. Doing
so can result in personal injury,
smoke or fire from the motor,
motor damage, or damage to
the tool anvil.
3. For operator safety, hold tool
body firmly during operation to
maintain control.
4. Do not allow unauthorized
persons at the worksite. Tool
should be used by trained adult
personnel and kept away from
children.
5. Use correct charger, power cord,
and battery with this tool. Do not
charge the battery using another
manufacturer’s battery charger.
Do not use
this tool’s charger for
other manufacturer
’s batteries.
Do not use modified battery
packs. Doing so could result in
battery explosion resulting in
property damage or injuries.
6. Read this manual carefully, and
charge the battery properly.
Improper usage could result in
the charger or battery pack
catching fire.
•
Use the charger with the
specified rated power
supply. Do not plug the
charger into direct current,
generators, or an external
transformer. This can cause
abnormal heat resulting in
damage or injury.
•
Do not charge the battery
below 0 °C (32 °F) or above
40 °C (104 °F).
•
Use charger and recharge
batteries in a well ventilated
area. Do not cover the
charger with any fabric or
enclosure.
•
Unplug charger when not in
use.
7. Do not touch power plug with
wet hands. Doing so can result
in electric shock.
8. Maintain a safe work
environment.
•
Do not use the tool,
charger, battery in any area
subject to rain or moisture.
No portion of the tool,
battery, or charger should
be exposed to water.
•
Maintain proper lighting in
the workplace.
•
Do not use the tool or
charge the battery pack
where combustible gases or
liquids are present.
9. Immediately stop outdoor
battery charging and disconnect
power cord from socket if
thunder or lightning is present.
10. Do not expose or dispose of the
battery in fire. Do not heat
battery pack with a hot plate or
microwave. Doing so dissolves
insulations, damages protective
systems, and can cause
explosion or fire.
Summary of Contents for BP-T40
Page 21: ...21 Exploded View Parts ...