Aimco BP-T40, Instruction Manual

Page: 14 / 24

14
Change Reverse Lever Direction
1) Remove battery pack from BP-T.
2) Remove roll pin.
3) Pull reverse lever forward to remove it.
4) Change the setting and reattach reverse lever to tool.
5) Replace roll pin.
LED Battery Level Indicator
Squeeze trigger, and battery level LED will indicate battery level by its color.
BP-T stalls when battery level is less than 5%. During pulsing, the LED color
can change from green to orange.
LED battery-level indicator colors
LED color Battery level (%)
RED light appears immediately
after stalling, then goes out. Less than 5%
ORANGE 6~10%
GREEN 11~100%
RED Battery error
WARNING
When LED lights RED, BP-T will stop fastening even
before reaching the preset target torque. Replace the
depleted battery with a fully charged one.
Charge a brand-new battery completely before first use. Ending battery
charging prematurely can cause the LED to incorrectly display remaining
capacity. If this happens, charge the battery fully a few times, and the LED
should display correct information.