Aimco AM-45, Instruction Manual

Page: 10 / 28

10
Power Setting and AC Input Socket (C13 Specification)
The input voltage of the power supply is ranged between 100
–240VAC,
50/60 Hz. Use the correct voltage to avoid any damage to the power supply.

Connect one side of the cable to the AC power socket and the other
side to the electric socket (C13 specification) of the AM Controller.

Change the two-stage switch on the top of the AM Controller by hand.
– On mode: the power supply will be switched on.
– Off mode: the power supply will be switched off.
Two-Stage
Switch Top of the AM Controller AC input socket
(C13
specification)
Indicator Light
Light Color Description
Green Light After switch on, the light flashes orange three times, then
turns to green
No Light No DC voltage output
Flashing
Green
Short circuit protection
Over power protection
Red Light Brakes
Flashing Red Heating protection (temperature set at 167°
–185° F (75°–
85° C)