PB-1000 PANEL BEATER
TM
PRODUCT MANUAL
PAGE 9
OPERATING
INSTRUCTIONS
VIDEO DEMONSTRATION
Video Demonstration of the Panel Beater™ In Action can be found with the following links:
Panel Beater Demonstration Video:
Panel Beater Benefits Video:
UNPACK PANEL BEATER™
READ THESE OPERATING INSTRUCTIONS
PLUG IN PANEL BEATER™
Plug power cord into appropriate outlet to charge the Battery, the “smart” charger will not over charge the bat-
tery.
NOTE: The Panel Beater
TM
is designed for 110/120 volt 60 Hz power sources. The power requirement for
your machine is indicated on the back of your machine.
NOTE: If battery is below 12.5 volts it must be recharged.
This machine is equipped with AGM lead-acid storage batteries. Each battery
is liquid tight when kept in the upright position. However, in the event the
battery is tipped over and some acid spillage does occur, neutralize the acid
with baking soda.
WARNING! Follow battery manufacturer’s instructions contained in the
MSDS for your battery in case of spill or contact with battery contents.
Review the MSDS for additional recommendations. Report all injuries &
seek appropriate medical attention!!
WARNING!
