background image

V2.3

 US

5

the track, so the signal may not cross the track a second time
(given ideal conditions, the beacon will work well beyond 20
meters).  The beacon sends an infrared array of
approximately 17° or a 3:1 field of display.  This is to say that
at 3 meters the size of the array is approximately 1 meter.
The beacon can be powered by either 8 AA alkaline batteries
internal, which provide 20-30 hours of use, or from an
external 12V-power supply with the included cable.  To install
the internal batteries, remove the 4 screws from the cover of
the beacon, there you will find an 8-battery plastic retainer.
Install the 8 batteries matching the positive and negative
guidelines on the plastic retainer.  Using the external power
supply cable will bypass the internal batteries.

Warranty

Understanding that your new My-Chron 2 will be used in
competition, it comes with a full 1-year warranty.  The
warranty includes parts, labor and return shipping.  Return
shipping will be of the same service it was received, for
example, if it is sent next day air, it will be returned next day
air.  We understand you race and need your new My-Chron,
please allow a minimum 1-day to perform the repair.  The
warranty covers problems associated to electronic component
failure and product workmanship.  The warranty does not
cover problems caused by physical damage, abuse or
misuse.

My-Chron 2 Options

Expand the functionality and power of your new My-Chron 2
with these available options:

Exhaust Gas Temperature

Cylinder Head Temperature

Water Temperature

Water Temperature Fitting

Infrared Tire Temperature

Gearbox Temperature

Blue Back Light

Wheel Speed Sensor

PC Loader Cable

Colored Display Boxes

My-Chron 2 Contact Information

Notes:

IMPORTANT:

  The My-Chron

beacon is a common frequency. Only

one

 beacon is required per track,

regardless of the number of karts.
Additional beacons will produce split
times.

Manufacturer

Aim s.r.l. 

Via Cavalcanti 8, 20063 – Cernusco s/n  -MI- ITALY
Tel. +39-02-92112106
Fax. +39-02-92118024
E-mail 

[email protected]

North American Distributor and Service Center

AIM Sportsystems

508-C  N. Spring Street, Lake Elsinore, CA  92530

Toll Free 1.800.718.9090  (US and Canada)

Phone (909) 674.9090
Fax (909) 674.5699
E-mail  

[email protected]

Web  

www.aimsports.com

Summary of Contents for My-Chron 2






Reviews: