![background image](http://html1.mh-extra.com/html/aim/mxl-pista/mxl-pista_user-manual_2871710018.webp)
MXL
User manual
Release 1.13
2 4
2.8 – How to connect MXL to the MemoryKey
MXL
can be connected via CAN bus to
MemoryKey
. It allows to download data
without connecting the logger to a PC. The connection has to be done as follows:
•
MXL Pista
: connect the
MemoryKey
to 5 pins Binder 712 female connector on
the back of the logger (pin 1 = CAN+ ; pin 4 = CAN-)
•
MXL Pro/MXL Pro05
: connect
MemoryKey
to 22 pins Deutsch type connector
using the proper cable labelled CAN Exp (pin 1 = CAN+; pin 4 = CAN-).
Note: it is not possible to connect MemoryKey to MXL Strada.
See:
•
Appendix “A.1” for further information concerning the loggers pinout;
•
loggers wiring user manuals for further information concerning
MXL
wiring;
•
MemoryKey
user manual for information concerning its installation on the
vehicle.
The figure below shows a CAN network where
MXL
is connected to a
MemoryKey
too. In case Data Hub is not available plug
MemoryKey
directly into
MXL
as
explained before.
www.aim-sportline.com
17
Summary of Contents for MXL Pista
Page 1: ...MXL USER MANUAL...