Aim MXL Pista, User Manual

Page: 21 / 43

MXL
User manual
Release 1.13
www.aim-sportline.com 20
2 6
3.2 – Alarm led and shift light
AL 3
MENU
<< >>
AL 2
AL 1 GEAR
AL 6
VIEW MEM
ok quit
SPEED
rpm
km/h
AL 5
AL 4
The ten top led (shift light) of the display are connected to engine RPM; values
corresponding to each led are set via software or via keyboard. See the paragraph
concerning keyboard function or
Race Studio Configuration user manual for further
information on the subject.
The 6 alarm led on the left and on the right of the display can be connected to 6
different channels and - setting the related threshold values - they can work as max
or min alarm.
1 3
3.3 – Other useful information
MXL divides data of a session in runs: each run includes the laps between two pit
stops / 2 switch off / 2 sampling.
If configured to sample split times, the system shows “Split nr.x” (Sx) up to the
number of splits inserted; the final split is shown as complete lap.
When MXL records the best lap time, the bottom field of the display shows “BEST
LAP TIME”. This happens also if the static string is enabled.
The logger has from eight ( MXL Strada , Pista e PRO ) to twelve ( MXL Pro05 ) analog
channels and shows six of them as follows:
•
on the left of the display, channels set on fields 1 and 2 of system configuration
window of Race Studio Configuration software; in the image above they are
labelled “water” and ”P oil” and the related values are 84.5 and 3.2;
•
on the static string (if not enabled) two by two other four channels; in the image
above they are labelled CH_3 and CH_4 and their values are respectively 326
and 678.
Channels settings are stored by the logger and restored at each switch on.