Aim MXL Pista, User Manual

Page: 14 / 43

MXL
User manual
Release 1.13
To activate High/Low power mode:
•
unscrew the back of the case;
•
place the clip, circled in the figure below, beside one of the connectors for low
power mode and beside both of them for high power mode.
Note : when the transmitter is in high power mode, both power led switch on when the
transmitter is switched on.
WARNING : it is recommended to verify the number of transmitters installed on the
track before installing one’s own. It is in effect possible that transmitters - additional
to the one placed on the start/finish line - are installed on the track. The simplest way
to mark laps and splits is using the same transmitter(s) for all drivers.
Use obscuring time function (to be set in the software configuration of the logger) to
be sure that
MXL reads only the desired transmitter(s).
Refer to Race Studio Configuration user manual for detailed information
concerning the system configuration.
www.aim-sportline.com 13