AIM Hybrid Pulse MIG Welder -HPM-350-HD
A
IM MIG OWNER’S MANUAL Rev. 2019
:
| GENERAL INSTRUCTIONS
14
GENERAL INSTRUCTIONS
Do not try to weld with low batteries
. This will cause a substandard weld and rapid heat build-
up in cables. The charge indicator lights and/or analog voltage meters provide an indication of
the battery charge condition. Monitor those indicators regularly to ensure proper weld
performance.
Do not overheat the machine
. Periodic cooling is suggested.
Use “00”
Steel Wool to clean the copper surfaces. Oils or contamination could interfere with
the welding process.
Warning: Always turn the welder off and disconnect the power before conducting
maintenance or changing wire spools