AIM Hybrid Pulse MIG Welder -HPM-350-HD
A
IM MIG OWNER’S MANUAL Rev. 2019
:
| INDICATOR LIGHTS
8
INDICATOR LIGHTS
There are two sets of three indicator lights displayed on the front panel of the machine; a set
for each of the two batteries.
The
RED
light indicates there is power to the charger.
The
YELLOW
light indicates the charger is connected to the battery and charging when
plugged into the 110V-15-amp power source.
The
GREEN
light indicates
high voltage level of the battery
–
full charge.
When the GREEN light flashes with the YELLOW charge light
–
this signals the battery is
approaching a full charge.
When the GREEN light is
on almost continuously
–
this indicates maximum charge.
➢
Green light should always alternate with yellow light.
➢
The alternating GREEN/YELLOW mode is signaling that the charger is in maintenance
mode and maintaining the battery(s) at peak voltage
➢
It is recommended that units in daily use be kept plugged in to the power source to
maintain the batteries
➢
If storing the unit for long periods,
please refer to the battery manufacturer’s
guidelines for battery storage
The voltage required for your charger
’
s power source is indicated on the back label of the
charger.
Voltages Available:
110 / 120 Volt 60 HZ
Other voltages are available on special order contact A.I.M. for information.