Software Library Reference Manual for VME 429
121
Section 6 - Receiver Functions
6 RECEIVER
FUNCTIONS
Section 6 defines the Receiver Functions of the API S/W Library. The following functions
are utilized to setup/start/stop the receiver and monitor operation, enable filters/interrutps
based on Labels, read data buffers for specified label,and obtain status of Label
transfers/errors. These commands can only be applied to 429 channels which are
configured as receiver.
Table 6-I
Receiver Function Descriptions
Function
Description
Global Functions (for all Receiver Operation modes)
Api429CmdRxIni
Initializes Receiver mode
Api429RxReadActivity
Provides a bit field on which Labels were already received
Api429CmdRxLabCon
Defines the Labels to be received
Api429CmdRxLabDataCon
Initializes the Receiver Label data buffer
Api429CmdRxLabRead
Reads Receiver Label status
Global Functions (for all Receiver Operation modes plus Chronological Monitor)
Api429CmdRxStart
Starts Receiver Operation
Api429CmdRxHalt
Stops Receiver Operation
Api429CmdRxStatusRead
Reads Receiver Status
Selective Receive Mode
Api429CmdRxLabDataRead
Reads Receiver Label Data
Api429CmdRxGetBufAddress
Gets Receiver buffer base address
Loop/Pollution Mode
Api429CmdRxPollBlkDef
Controls Receiver Label Pollution Block
Receiver-Transmitter Mixing Mode
Api429CmdRxEnaMixChannel
Enables Receiver Mixing Mode
Summary of Contents for AMC429
Page 2: ......