manualshive.com logo in svg

Aim-TTI PSA3605, Short Manual, Page: 16 / 23

Share
Download
Aim-TTI PSA3605 Short Manual Download Page 16

 

- 15 - 

Limit Action opens pop-up menu which defines the action that will take place when the limit 
condition is met.  This can be an audible beep, a pulse from the trigger socket, or both. 

Further actions of Sweep Triggering or Data Logging can be created from the respective 

function menus. The action is created at the end of the sweep. 

Limit Offset opens a new control screen from which a limit can be offset from its initial 
values.  This is particularly useful for limit patterns which would otherwise have to be 
recreated.  

 

Limit Fix/Unfix

 

fixes the limit pattern on the screen so that it will not change when the 

centre frequency is changed. A message is displayed within the graticule area. This 
allows a pattern to be used for alternative\n frequency points. Unfix recalculates the 

pattern for the current frequency range and level.. 

Channel Markers are a special case of a limit pattern file which create only vertical lines at frequency 
points defined in the file.  Channel marker files are created within PSA Manager and have files names 
starting with a $ symbol. 

4.6  Traces/Markers 

4.6.1  Traces/Markers > Traces Control 

Controls the display of the three traces: Live (green), View (white), and Reference 
(purple). Also controls the creation of the View trace. 

 

View copies the current Live trace to the View trace, and turns the View trace on if it 
was off. 

 

Swap halts the Live trace and places the View trace in front of the Live trace. 
Measurement markers then operate on the View trace.  Pressing the key again, or 
re-starting the Live trace with the Run key will swap the traces back. 

View On/Off toggles the View trace on or off without creating 
a new View trace. Ref On/Off toggles the Reference trace on 
or off. Live On/Off toggles the Live trace on or off.  In Dual 

Trace mode , both traces are toggled together. 

 

4.6.2  Traces/Markers > Trace Mode 

Provides control of the way in which the sweep is written to the Live trace. 

 

Normal each frequency point of the trace is written with the amplitude obtained from 
the current sweep. 

 

 Peak Hold the trace is written with the highest amplitude obtained from the current 
sweep. 

 

Average the trace is written with the highest amplitude obtained from the current 
sweeps. 

 

Reset operates in both Average and Peak hold modes to re-start the process from 
zero. 

 

More 1 of 2 selects a further set of function keys relating to Dual Trace mode when 
either Peak Hold or Average have been selected: 
 

Dual Trace Mode When the trace mode is set to Peak Hold or Average an alternative display 
mode can be selected where the normal and processed traces are displayed together. 

Limit 

Action 

Traces 

Control 

View 

Off/On 

Trace 
Mode 

Normal 

Reset 

Limit 

Offset 

Peak 

Hold 

Average 

View 

Swap 

Ref 

Off/On 

Live 

Off/On 

More 

Limit 

Fix/Unfix 

Summary of Contents for PSA3605
























Reviews:

No comments