AICSYS SBC-6504, User Manual

Page: 69 / 79

SBC-6504 User Manual
4.10 PnP/PCI Configuration Setup
This section describes the configuration of PCI (Personal Computer Interconnect)
bus system, which allows I/O devices to operate at speeds close to the CPU speed
while communicating with other important components. This section covers very
technical items that only experienced users could change default settings.
z PNP OS Installed
Select Yes if the system operating environment is Plug-and-Play aware (e.g.,
Windows 95). The default value is “No”.
z Init Display First
This item allows you to decide whether PCI Slot or Onboard to be the first primary
display card.
z Reset Configuration Data
Normally, you leave this item Disabled. Select Enabled to reset Extended System
Configuration Data (ESCD) when you exit Setup or if installing a new add-on
cause the system reconfiguration a serious conflict that the operating system can
not boot. Options: Enabled, Disabled.
69