AICSYS SBC-6504, User Manual

Page: 61 / 79

SBC-6504 User Manual
*** On-Chip Serial ATA Setting ***
¾
SATA Mode
There are these options for you to set up SATA mode: IDE or RAID.
¾
On-Chip Serial ATA
Use this item to enable or disable the built-in on-chip serial ATA.
¾
SATA PORT Speed Settings
Use this item to select SATA I or SATA II device support forcedly.
¾
PATA IDE Mode
Use this item to set the PATA IDE mode. When the PATA IDE mode is
set for Primary, P1 and P3 are Secondary; on the other hand, when set
for Secondary, P0 and P2 are Primary.
¾
SATA Port
When the “PATA IDE Mode“ is Primary, SATA Port will be ” P1, P3 is
Secondary” that means SATA 2 and SATA 4 are Secondary; when
Secondary, it will be “P0, P2 is Primary “, SATA 1 and SATA 3 are
Primary.
Press <Esc> to return to the Integrated Peripherals page.
61