AICSYS SBC-6504, User Manual

Page: 63 / 79

SBC-6504 User Manual
z Super IO Device
Scroll to this item and press <Enter> to view the sub menu Super IO Device.
¾
Onboard FDC Controller
Select Enabled, if your system has a floppy disk controller (FDC)
installed on the system board and you want to use it. If you install
and-in FDC or the system has no floppy drive, select Disabled in this
field. Options: “Enabled” and “Disabled”.
¾
Onboard Serial Port 1/2
Select an address and corresponding interrupt for the serial port.
¾
Parallel Port Mode
Select an operating mode for the onboard parallel (printer) port. Select
Normal unless your hardware and software require another mode in
this field. There are several options for your selection, “EPP1.9”, “ECP”,
“SPP”, “ECPEPP1.7”, “EPP1.7”, etc.
¾
EPP Mode Select
Select EPP port type 1.7 or 1.9.
¾
ECP Mode Use DMA
Select a DMA channel for the parallel port while using the ECP mode.
63