AIC Rack Venus, User Manual

Page: 60 / 144

49
Chapter 4. JBOD 2U30 BMC Settings Rack Venus User Manual
Chapter 4� 2U30 JBOD BMC Settigs
4�1 Utility Setup on Host
Please refer to Section 3.2.
4�2 Connect Host to BMC by RS232
1. Type in " [" and the IPMI serial interface will appear.
Type command for login the interface.
#[sys pwd –u admin admin ]
You will receive the response [OK].
You can use this interface to set the BMC LAN IP. You can set eth0 (in the JBOD front) and
eth1 (inner the rack).
Both eth0 and eth1 default setting is DHCP.