AIC Rack Venus, User Manual

Page: 52 / 144

41
Chapter 3. 2U30 JBOD Subsystem Configuration Settings Rack Venus User Manual
3�6�3 Implementation on SES Elements
Only the fields highlighted in green are supported.
3.6.3.1 Temperature Sensor Element
(A) Temperature Sensor Control Element
Byte / Bit 7 6 5 4 3 2 1 0
0
COMMON CONTROL
SELECT PRDFAIL DISABLE RST SWAP
1 PSU Module2 STATUS_WORD
2 Reserved
3 Reserved
(B) Temperature Sensor Status Element
Byte / Bit 7 6 5 4 3 2 1 0
0
COMMON CONTROL
Reserved PRDFAIL DISABLE SWAP ELEMENT STATUS CODE
1 IDENT FAIL
2 TEMPERATURE
3 Reserved
OT
FAILURE
OT
WARNING
UT
FAILURE
UT
WARNING
Field Value
ELEMENT STATUS
CODE
OK: Everything is Ok
NON-CRITICAL: If either warning limit is exceeded
CRITICAL: If either failure limit is exceeded
FAIL A warning or failure condition is detected
TEMPERATURE Temperature reading
OT FAILURE Temperature has exceeded the failure high threshold value
OT WARNING Temperature has exceeded the warning high threshold value
UT FAILURE Temperature is below the failure low threshold value
UT WARNING Temperature is below the warning low threshold value