Fig. 1. Boiler Packaged for Transport
Fig. 2. Data Plate - Typical
EN 15502-1/EN 15502-2-1
Year built:
1015 19
2019
MASTER:
SLAVE:
Nominal Heat Input
Nominal Useful Output at [80°C/60°C]
Nominal Useful Output at [50°C/30°C]
Qn Min. [kW]:
Pn Min. [kW]:
P Min. [kW]:
QN Max. [kW]:
Pn Max. [kW]:
P Nom. [kW]:
Nesta
plus
MODEL:
PIN:
Serial no. :
Standards:
Power Supply:
Power Consumption:
IP Class:
Max. Working Pressure [PMS]:
Max. Working Temperature:
Flue appliance type:
NOx Class:
Floor-Standing Condensing Boiler
kW
h e a t i n g s y s t e m s
The boiler shall be installed by a qualified installer in accordance with
provided installation and maintenance technical manual, national and
local requirements, gas safety regulations and relevant standards.
Please read installation and
maintenance manual before
installing the boiler.
The boiler is pre-adjusted in
the factory to the gas pressure
of 20mbar for gas type G20.
Gas appliance
category
Gas type
Gas appliance
pressure
Country of destination
AIC Europe B.V.
Graafschap Hornelaan 163A
NL-6001 AC Weert
The Netherlands
EXAMPLE
Boiler Marking
The data plate is located at the back of the boiler.
i
G-7
B-070343_EN • B
G
eneral
I
nformatIon
Package Contents
î
A NESTA PLUS boiler
î
An Installation and Maintenance manual
î
Components to be installed:
î
A condensate trap
î
Two air inlet connections, for open or closed
flue chimney type.
î
A bottom front panel.
î
A gas conversion sticker.
For transport, the components men-
tioned above are stored inside the boiler.
Refer to
“Unpacking the Product” on
page I-28
for the complete handling,
unpacking and installation instruc-
tions.
Disposal of the Product at the End of Ser-
vice Life
At the end of the service life, the prod-
uct should not be disposed of as sol-
id urban waste, but should be handed
over to a differentiated waste collection
centre.
