I-74
G-084383_EN • 03
A
dditionAl
i
nformAtion
for
the
i
nstAller
Boiler Settings for the Installer
Access Levels
Three different levels of settings are available for the
Installer : End user level, Commissioning level and
Engineer level. A fourth level, OEM, is only accessi-
ble at factory level, through the use of a code.
Each level allows to set certain specific parameters
or program the boiler, according to the installed cir-
cuits.
The menus of the End user level are described in
“Operating the Controller - End User Level” on
page U-24.
The menus for the qualified profession-
al (Commissioning and Engineer) are described in
the following pages.
To access the Commissioning and the Engineer
levels, proceed as follows:
Menus and Settings
The table on the following page contains some of
the menus and submenus for the installer. The last
column allows the installer to write down the setting
defined for each parameter at installation, if it is dif-
ferent from the default.
For any question related to the menus, please con-
tact AIC’s technical support.
Selecting the User Level
Expert
Enduser
Symbols used for the
operation of the selector
:
turn the selector to the left or to the right.
depress shortly the rotary selector.
turn the selector to adjust the value, then depress the se-
lector to validate.
Select user level
Enduser
Select user level
Engineer
Select user level
Continue
Login successful
Accessible for engineer
The process is identical to
access the commission-
ing level.
i
Summary of Contents for COILMASTER 100
Page 69: ...3 5 2 1 Fig 22 CM 100 120 Removing and Installing the Burner I 69 G 084383_EN 03 Maintenance...
Page 92: ...I 92 G 084383_EN 03 Declaration of Conformity...
Page 93: ...I 93 G 084383_EN 03 NOTES...
Page 94: ...www myaic eu AIC Europe B V Graafschap Hornelaan 163A NL 6001 AC Weert The Netherlands...
