Fig. 23. Cleaning the Combustion Chamber
I-70
G-084383_EN • 03
M
aintenance
Checking and Cleaning the Combustion
Chamber
Conditions:
î
Burner removed, see
“Removing and Install
-
ing the Burner - CM 60 - 70 - 80” on page
I-66
,
or
“Removing and Installing the Burner
- CM 100 - 120” on page
I-68
.
Tools and material:
î
Industrial vacuum cleaner
î
Nylon bristle brush
î
Torch
Check Procedure:
1.
Using a torch, visually check the condition of
the combustion chamber. If it is dirty, clean it.
Cleaning Procedure:
1.
Using a nylon bristle brush, sweep the walls
of the combustion chamber.
2.
Using an industrial vacuum cleaner, remove
all deposits from the combustion chamber
heating surfaces.
OFF
If the burner door insulation plate
is present, do not perform step 3,
as it could damage the insulation
plate.
3.
Pour some clean water to remove any residues.
Follow-on tasks:
1.
Remove and clean condensate trap, refer to
“Cleaning the Condensate Pipe and Trap”
on page
I-61
2.
Install the burner, see
“Removing and In
-
stalling the Burner - CM 60 - 70 - 80” on
page
I-66
,
or
“Removing and Installing
the Burner - CM 100 - 120” on page I-68
.
Summary of Contents for COILMASTER 100
Page 69: ...3 5 2 1 Fig 22 CM 100 120 Removing and Installing the Burner I 69 G 084383_EN 03 Maintenance...
Page 92: ...I 92 G 084383_EN 03 Declaration of Conformity...
Page 93: ...I 93 G 084383_EN 03 NOTES...
Page 94: ...www myaic eu AIC Europe B V Graafschap Hornelaan 163A NL 6001 AC Weert The Netherlands...
