AHRI 5450 Series Installation & Operating Instructions Manual Download Page 15

Page: 15 / 48

The Installer/Service menu is used by Installers and Service personnel to set up and troubleshoot the HPPH.

This menu is accessed by pressing and holding the UP and MENU buttons for 3+ seconds.

WARNING: This

menu should never be used by the end user as changes can affect proper operation of the unit.

Table D: INSTALLER/SERVICE MENU — HEAT ONLY Configuration

Item

Range

Default

Value

Access Level

Description

Set Current

Time

12:00A–11:59P

---

Installer

Selects current time – “A” or “P” will

indicate whether the set time is AM or

PM.

Pump Periods

0–4

Installer

Only available if Pump Operation in

the Installer’s Menu is set to “4-

Speed Enabled” or “Variable

Enabled”.

Pump On Time 1

12:00A–11:59P

---

Installer

Select ON time for Pump Period #1 to

take effect.

Pump Off Time 1

12:00A–11:59P

---

Installer

Select OFF time for Pump Period #1

to stop.

Pump Speed 1

1–4 if 4-Speed Enabled

0%–100% if Variable

Enabled

Installer

On 4-speed pumps, this denotes the

selected pump output (which con-

nects to the pump for the selected

speed) for this pump period. On

Variable speed pumps, this denotes

the PWM signal to be provided to the

pump for pump operation.

Return Valve 1

Pool/Spa

Pool

Installer

Select the position of a 3-way valve

located between the HPPH and the

Pool/Spa for this scheduled pump

period.

Suction Valve 1

Pool/Spa

Pool

Installer

Select the position of the 3-way valve

located between the Pool/Spa and the

Pump for this scheduled pump period.

Pump On Time 2

12:00A–11:59P

---

Installer

Select ON time for Pump Period #2 to

take effect.

Pump Off Time 2

12:00A–11:59P

---

Installer

Select OFF time for Pump Period #2

to stop.

Pump Speed 2

1–4 if 4-Speed Enabled

0%–100% if Variable

Enabled

Installer

On 4-speed pumps, this denotes the

selected pump output (which con-

nects to the pump for the selected

speed) for this pump period. On

Variable speed pumps, this denotes

the PWM signal to be provided to the

pump for pump operation

Return Valve 2

Pool/Spa

Pool

Installer

Select the position of a 3-way valve

located between the HPPH and the

Pool/Spa for this scheduled pump

period.

Suction Valve 2

Pool/Spa

Pool

Installer

Select the position of the 3-way valve

located between the Pool/Spa and the

Pump for this scheduled pump period.

Pump On Time 3

12:00A–11:59P

---

Installer

Select ON time for Pump Period #3 to

take effect.

Summary of Contents for 5450 Series

















































Search results

Summary of Contents for 5450 Series

Reviews:

Related manuals for 5450 Series

Brands by name

Popular brands

AHRI 5450 Series, Installation & Operating Instructions Manual

Search results

Summary of Contents for 5450 Series

Reviews:

Related manuals for 5450 Series

Brands by name

Popular brands