ahlmann AL 65, Operating Instructions Manual

Page: 69 / 138

K65C/K75C/K95C 4-9 K65C/K75C/K95C 4-9
DANGER
- Secure the jack by a suitable
support to prevent it from sinking
into the ground.
- Make sure that the jack is fitted
well.
(11) Loosen the wheel nuts com-
pletely and remove them.
(12) Lower the loader slightly with
the jack until the wheel bolts are free.
(13) Push off the wheel from the
wheel hub by moving it back and
forth. Remove the wheel and roll it
aside.
(14) Mount the new wheel onto the
planetary axle.
(15) Fit the wheel nuts by hand: if
necessary, grease them beforehand.
(16) Lower the front/rear axle using
the jack.
(17) Tighten the wheel nuts with a
torque wrench to 440 Nm.
CAUTION
Tighten the wheel nuts after the first
8-10 operating hours.
DANGER
- Secure the jack by a suitable
support to prevent it from sinking
into the ground.
- Make sure that the jack is fitted
well.
(11) Loosen the wheel nuts com-
pletely and remove them.
(12) Lower the loader slightly with
the jack until the wheel bolts are free.
(13) Push off the wheel from the
wheel hub by moving it back and
forth. Remove the wheel and roll it
aside.
(14) Mount the new wheel onto the
planetary axle.
(15) Fit the wheel nuts by hand: if
necessary, grease them beforehand.
(16) Lower the front/rear axle using
the jack.
(17) Tighten the wheel nuts with a
torque wrench to 440 Nm.
CAUTION
Tighten the wheel nuts after the first
8-10 operating hours.