ahlmann AL 65, Operating Instructions Manual

Page: 118 / 138

K65C/K75C/K95C 8-17 K65C/K75C/K95C 8-17
Figure 8-35
Figure 8-36
Readjustment:
(6) Pull off the sleeves (8-33/2
and 8-34/2).
(7)
Remove the adjusting discs
and insert them in the screw plugs
(8-33/1 and 8-34/1), adding them to
the stop discs.
DANGER
- The two screw plugs must be
readjusted synchronously to
prevent the piston from getting
jammed.
- For each of the screw plugs, there
is only one adjusting disc beneath
the sleeve. The brake cannot be
adjusted any further.
(8) Push the sleeves (8-33/2 and
8-34/2) onto the setscrews again.
(9)
Screw the screw plugs into the
housing.
(10) Carry out a function check.
8.2.17 Maintaining/replacing
the fresh air filter
(1) Lower the bucket arm and
insert the articulation safeguard
(1-4/arrow).
(2)
Loosen the four fastening
screws (8-35/arrows) of the heater
cover and remove the cover.
(3)
Remove the filter element
(8-36/arrow) and clean it using
compressed air.
CAUTION
Do not use any petrol, hot fluids or
compressed air for cleaning.
Figure 8-35
Figure 8-36
Readjustment:
(6) Pull off the sleeves (8-33/2
and 8-34/2).
(7)
Remove the adjusting discs
and insert them in the screw plugs
(8-33/1 and 8-34/1), adding them to
the stop discs.
DANGER
- The two screw plugs must be
readjusted synchronously to
prevent the piston from getting
jammed.
- For each of the screw plugs, there
is only one adjusting disc beneath
the sleeve. The brake cannot be
adjusted any further.
(8) Push the sleeves (8-33/2 and
8-34/2) onto the setscrews again.
(9)
Screw the screw plugs into the
housing.
(10) Carry out a function check.
8.2.17 Maintaining/replacing
the fresh air filter
(1) Lower the bucket arm and
insert the articulation safeguard
(1-4/arrow).
(2)
Loosen the four fastening
screws (8-35/arrows) of the heater
cover and remove the cover.
(3)
Remove the filter element
(8-36/arrow) and clean it using
compressed air.
CAUTION
Do not use any petrol, hot fluids or
compressed air for cleaning.