OUTPUT CYCLE Key:
F
0 1
A
Example:
address 01
Only successive numbers between 01 and 99 should be entered for network
operation so that the device 00 cannot be falsely addressed in case of a power
supply failure.
8.3 Manual Data Output
For the output of data to a printer the output channel must be set to ´
U
´ by
using the key
CH
▲
within the function OUTPUT CYCLE (see 7.3.1). The output
format is not relevant for the manual data output, with the exception of the
read-out of the memory. All function values that have been selected by using
the rotary switch and, possibly, with the key F, can be printed out with the next
print output by using the key OUTPUT.
Manual data output within each function with key:
OUTPUT
Switch
Func Key Print Output
MEAS. VAL.
12:34:00 01: +0023.5 °C
MAX VALUE
MAXIMUM: 01: +0020.0 °C
MIN VALUE
MINIMUM: 01: -0010.0 °C
AVERAGE V.
AVEARGE VAL: 01: +0017.8 °C
AVERAGE V.
all meas. values
AM
N
F
F, F
CH MEAS.VAL MAXIMUM MINIMUM AVG. COUNT
01: +0023.0 +0025.0 +0019.0 +0022.0 99999
s. man. 6.4.4
NUMBER
NUMBER: 00-123
MEMORY
MEMORY: - - - -
see 7.4.2
MEMORY
FR
F
MEMORY: S0501.3 F0324.6 A
RANGE
01:NiCr +0123.4 -0012.0 +0000.0 °C 1.0000 E+0 - - -
RANGE
ext. programm.
LM
F
CH ZERO SLOPE LM P FUNC CALOFS CALFA A-START A-END B1 MX EF AH AL CF UMIN
01:+0000.0 +1.0000 5. 1 MESS +00000 32000 +0000.0 +1000.0-01 M1 -- S- E2 05 12.0
see manual 6.10.1
LV MAX
LIM-MAX: 01: -0100.0 °C
LV MIN
LIM-MIN: 01: +0020.0 °C
BASE
BASE: 01: -0273.0 °C
FACTOR
FACTOR: 01: +1.0350E-1
BASE
ZC
F
ZERO CORR: 01: -0000.7 °C
FACTOR
SC
F
SLOPE CORR: 01: +1.0013
TIME
TM
TIME: 12:34:00
TIME
S
F
START TIME: 07:00:00
44
ALMEMO
®
2290-8
Analogue Output
