7.4.3 Measured values Output
The content of the data memory can, using measuring points, be provided as
output to the display and the analogue output or, using cycles, be provided as
output to the serial interface. The output channel is relevant in this context.
Output to the Display and to the Analogue Output
Select output channel: Display: output channel ´
-
´
Analogue output: output channel ´
S
´
Output to the display and to the analogue output is only
possible, if the data cable not connected.
Select desired measuring point,
CH
▲
obtain first meas. value on the display,
OUTPUT
recall individual measured values,
F
start automatic output
OUTPUT
display (´
-
´):
1 value/s
recorder output (´
S
´):
2 values/s
stop automatic output
START/STOP
recall individual measured values
F
re-start automatic output
OUTPUT
cancel automatic output
CLEAR
During the memory output the arrow ´
MEMORY
´ is indicated for control
purposes, similar to when recording. At the end a ±20 digit notch is written on a
recording device. The output can be repeated for each further measuring point.
Output to the Serial Interface
Select output channel:
´
U
´
(No longer required as of version 5.71)
Set output format: e.g.
´
nU
´
Start automatic output:
OUTPUT
stop automatic output
START/STOP
recall individual measured values
F
re-start automatic output
OUTPUT
cancel automatic output
CLEAR
During the memory output the display indicates ´
S
Out
´ and the arrow
´
MEMORY
´ is indicated. The memory content is provided as output with the
same print output as used for an output via printer and, if necessary, several
times and in different formats (see manual 6.6.1).
OUTPUT CYCLE
MEMORY
OUTPUT CYCLE
MEMORY
40
ALMEMO
®
2290-8
Sleep Mode
