Transducer
Conn. / Cable
Meas. Range
Dim.
Display
Function Channels
Difference
any
diFF
Maximum value
any
Hi
Minimum value
any
Lo
Average value over time
any
A[t]
Averag. val. over junctions
any
A[n]
Sum over junctions
any
S[n]
Total number of pulses
ZA 9909-AK2
0 ... 65000
S[t]
Pulses/print cycle
ZA 9909-AK2
0 ... 65000
S[P]
Alarm value
any
Alrm
Thermal coefficient
ZA 9000-FS
W/m
2
K
q:dt
Wet bulb globe temp.
ZA 9000-FS
°C
UbGt
TC Temperature Compensation, PC Atmospheric Pressure Compensation
The
use of the function channels
for the output of measuring and calculated
variables with the corresponding reference channels is described in the manual
section 6.3.4.
Switch-off, i.e. deactivation of a programmed measuring channel
Function:
RANGE
Keys:
,
ENTER
CLEAR
After switch-off the measured value is no longer indicated, queried, or provided
as output. However, the programming is still maintained.
Re-activation of the measuring channel:
Function:
RANGE
Keys:
,
ENTER
ENTER
If the channel was previously activated, the channel will be re-activated with all
programming values. However, if the channel is already active, all
programming values will be cleared by operating the above key combination
(corresponds to selecting a measuring range).
ALMEMO
®
2290-8
23
Sensor Programming
