10
11
IT
EN
FR
DE
ES
PT
РУ
中文
中文
中文
5 LUBRICATING OIL
Applying silicone oil to the visor mechanism prevents the onset of corrosion and both-
ersome creaking.
Prerequisite: the helmet is placed on one of its two sides.
•
Remove the visor (see 4.2).
•
Apply a moderate amount of oil to the visor mechanism of the helmet.
•
Wipe off any excess oil with a cloth.
•
Replicate the operations on the visor mechanism on the other side of the helmet.
→
Install the visor (see 4.3).
In case of contact with skin, wash thoroughly with plenty of soap and water. In case of
contact with eyes, wash with plenty of water and seek medical advice. If swallowed,
seek medical advice. In case of inhalation, breathe in fresh, open air. Avoid exposure to
sunlight. Store in a dry place at a temperature below 50°C. Keep out of the reach of
children and animals.
Do not allow the product to penetrate into the soil/subsoil. Do not allow product to reach
surface water and/or sewage systems. Keep contaminated washing water contained and
dispose of it appropriately. In case of penetration into watercourses, soil or sewage
systems, inform the relevant authorities. Suitable material for collection: absorbent
material, organic material, sand. Do not litter the container in the environment.
4.5 ADJUSTING
THE FASTENING
You can adjust the movement of the engagement
tooth, thereby changing the travel of the button
and the pressure required to open the visor.
Prerequisite: the visor is installed and open, and the
helmet is resting on a flat surface. Perform this op-
eration with a Torx T7 screwdriver.
•
Unscrew the screw.
•
Adjust the movement of the plastic engage-
ment tooth (
1; arrow
) as desired.
→
Tighten the screw, making sure that the visor
closes securely.
6 TEAR-OFFS
Tear-offs allow you to protect the visor from
organic debris that may be deposited on it
whilst riding. They are designed to be applied
all together: once the outermost one has be-
come dirty, you can remove it and find a clean
one already in place underneath.
The tear-offs are applied to the two eccentric
pawls on the visor, which facilitates their
mounting and tensioning.
The tear-offs are shaped with a specially
extended edge to allow them to be easily
gripped and removed, even whilst the helmet
is being worn.
6.1 INSTALLATION
Prerequisite: the helmet is resting on a flat surface
with the visor assembled and closed.
Ensure that you have removed the two pro-
tective films applied to each side of the
tear-off.
•
Rotate the eccentric pawls towards the front of
the helmet (
1; arrow
).
•
Apply the tear-offs, placing the special-
ly-shaped removal edge (
2
) on the side of the
helmet you prefer.
→
Rotate the eccentric pawls towards the rear
of the helmet (
3, arrow
), thus stretching the
tear-offs over the visor.
6.2 REMOVAL
Prerequisite: the helmet is resting on a flat surface
with the visor assembled and closed.
•
Rotate the eccentric pawls (
1; arrow
) towards
the front of the helmet.
→
The tear-off is no longer under tension and can
be removed.
1
1
3
2
Summary of Contents for Pista GP RR
