aguri AGR760 Series User Manual Download

Page: 31 / 56

Route by coordinate

To navigate to a destination using a coordinate press the middle of the screen to access the

“Navigation” menu. Scroll until you see the “Route by coordinate” icon and press it once.
Enter the coordinate using the key pad and then press “OK”.

There are four different formats you can use when entering a coordinate:

•

Degrees, Minutes, Seconds

•

Degree Decimal Minutes

•

Decimal Degrees

•

Grid Reference

User note. When entering the Longitude you must ignore the minus (-) symbol.

After pressing “OK” the location of the coordinates will be shown on the map. If they are

correct, press the “tick” button and then follow the on screen instructions to calculate

a route.

Recalculate route

You have the option to recalculate your route if you want to avoid certain roads. However

this facility is only available once you have calculated a route. If the “Recalculate route” icon

is greyed out this means a route has not been entered and the option will not be available.
To recalculate a route, press the middle of the screen to access the “Navigation” menu and

press the “Recalculate route” icon. You can then choose how you want to recalculate your

route from the options displayed.

Avoid road

If you know the road number or name you want to avoid then select this option. Press

“Avoid road” and the unit will show you details of your route and a list of the road names

and numbers to be used. Use the up and down arrows at the right hand side of the screen

to see more details.
Next, select the road you want to avoid by pressing it once and the route will be

recalculated and displayed on the screen. The original route is shown in blue and the new

route in yellow. Select your preferred route by pressing the appropriate coloured button at

the bottom of the screen.
Once you select a route the unit will automatically switch to the Navigation Map View screen

and start to navigate. Note that the summary screen and route options will not be displayed

at this time.

Avoid by distance

This function allows you to avoid several roads from the calculated route so that you can re-

calculate the route over a defined distance, ranging from 1 mile to a maximum of 100 miles.
To use this function press the “Avoid by distance” button and the screen will show a

distance ‘slider’. Use your finger to adjust the slider to the required distance and press the

“Calculate” button. The route will be recalculated and displayed on the screen. The original

route is shown in blue and the new route in yellow. Select your preferred route by pressing

the appropriate coloured button at the bottom of the screen.

User tip. If your coordinate is in Decimal degrees format, you can enter it using

the Quick search feature. Tap the Quick search magnifying glass at the bottom

of the map view screen and enter the coordinate separated by a comma ie

53.475327, -2.331294. Next, press 'Navigate to' and proceed as normal.

31198 Aguri A5 56pp AGR760 Manual.indd 27/06/2022 10:49 (80.00) - 31 -