Wulstlos-Elektroschweißsystem
Typ
agru EF 110-B
Geräte-Nr. 11015801
Netz
230V 50Hz 2000VA 80% ED
Gewicht
21kg Baujahr: 2015
Lizenzhersteller
HÜRNER Schweißtechnik GmbH
Nieder-Ohmener Str. 26
D - 32325 Mücke
Typ
agru EF 110-B
Exklusives Produkt der Fa.
agru Kunststofftechnik GmbH
Ing.-Pesendorfer-Str. 31
A - 4540 Bad Hall
Tel. +43 7258 7900
Fax +43 7258 3863
Version October 2015
EN
9
agru EF 110-B User’s Manual
2.8 Identifying the Machine
Each machine is identified by a name plate. It shows the machine model
(“Typ”), its year of manufacture (“Baujahr”), the serial number (“Geräte-
Nr.”), the rated power (“Netz”), and the manufacturer (“Lizenzherstel-
ler”).
3
Product Description and Principles of Operation
3.1 Intended Use
The mobile welding system for inside beadless welding agru EF 110–B
is intended exclusively for joining plastic pipes and fittings according to
the electrofusion process, i. e. electrical-thermoplastic jointing with a
heater coil fitting (also called an electrofusion fitting). See Sect. 3.3 for
an overview of the welding process enabled by this system.
Only the welding parameters encoded in the fitting-specific bar code
can be used for a welding operation. When jointing with agru’s specialty
fittings for inside beadless welding, RFID transponder cards are used
instead of the bar code as the means of data input. If welding parameters
are entered manually, conform to the fitting manufacturer’s instructions.
Any modification of the control software or the welding parameters it
contains is strictly prohibited.
It is also part of the intended use to conform to the instructions provided
in the User’s Manual.
Important
The manufacturer can in no circumstances be held liable for
damage or consequential damage that occurs as a result of the
non-compliance with the procedures described in the User’s
Manual, the failure to use relevant welding parameters, or the
non-intended use. Any such deviation will void any and all war-
ranties under which the product may be.
3.2 Machine Description
3.2.1 Component Overview
Facing Tool
Control Unit
Fitting Clamp/Facing Tool
Carriage
P i p e / C o m p o n e n t C l a m p s
Fitting Clamps ø 20 - 63 mm
