Version October 2015
EN
23
agru EF 110-B User’s Manual
To print a tag of the welding operation of which the abstract is currently
displayed, the label tag printer has to be connected to the welder. Then
press the START/SET key in the ViewWeld screen.
5
Downloading the Reports
Interface
USB A Interface Port
for connecting USB mass storage media (such as a memory stick)
The interface port complies with the USB version 2.0 specification (i.e.,
maximum data rate of 480 megabits per second).
Important
When transferring welding reports to a USB stick, always be
sure to wait until the display shows the “Download finished”
message before you disconnect the USB stick from the product.
If you disconnect it too early, the unit may ask you whether you
want to delete the reports in memory, although they were not
properly transferred. In this case, if you delete the contents of
the report memory, the welding reports would be irrevocably
lost and would not be available elsewhere either.
5.1 Selecting the File Format
Connecting the storage media causes the the screen to appear in which
the format of the output file with the welding reports can be selected:
a PDF file with an abstracted or extended version of the report or the
format of the welding data management application DataWork. Using
the
×
and
Ø
arrow keys, select the file type you need and confirm your
selection by pressing the START/SET key.
The Service Report option is not important for normal operation. In the
scope of computer-assisted unit service, this report lists the events re-
lated to the maintenance of the welding unit.
5.2 Downloading All Reports
After the file type was selected, the next screen offers a “Print All Reports”
option. Selecting it will download all welding reports currently in system
memory in the previously selected file format.
5.3 Downloading by Commission Number, Date or Report Range
After the file type was selected, the next screen offers a “By Commission
Number,” a “By Date Range,” and a “By Report Range” options. Depend-
ing on the selection, the
×
and
Ø
arrow keys can be used to select from
the commissions currently in system memory the desired one, of which
the reports should be downloaded, or the alphanumeric keypad can be
used (see last Info in Sect. 4.1) to enter a start date and an end date,
or the first and the last report, that define a range of dates or a range
of reports of which the reports should be downloaded. When you press
the START/SET key, you cause the selected reports to be transferred
to the storage media.
5.4 Understanding the Report Download Process
The download starts automatically after a selection was made among the
options. Wait for all the selected reports to transfer and the “Download
completed” message to appear on the screen.
If a problem occurs while the download is in progress, an error message
Display 15
* Select File Type *
DataWork File
>PDF Abstract
PDF Ext'd Report
