© 2006-Present Agrowtek Inc.
www.agrowtek.com
| 200 N Anets Dr. Northbrook, IL 60062 | [email protected]
6
Run/Stop Menu
The controller will not operate until it is placed into “RUN” mode. This allows the
user to setup the controller before allowing it to operate. This function can also
be used for maintenance operations.
To start/stop the controller:
1.
Press the RIGHT arrow key to enter the RUN/STOP menu.
2.
Press the LEFT arrow key to start or stop the controller.
Press the UP arrow key to exit the menu.
Accessing the Menus
This controller has an advanced set of digital timers, clocks and counters in conjunction with a software program that offers
complex control of your equipment. The variables are customer adjustable values such as timers, temperature, etc. that can
be set very easily on the controller screen.
Accessing the Main Menu
System Menu #1
1.
Press the DOWN arrow key to enter the main menu.
2.
Press the LEFT arrow key to enter the climate settings such as
temperature, humidity, CO2, and solar switch point.
3.
Press the RIGHT arrow key to set the various timer settings
such as pump cycles, CO2 timers, etc.
4.
Press the DOWN arrow key to enter system menu #2.
5.
Press the UP arrow key to exit the menu.
System Menu #2
6.
Press the LEFT arrow key to enter the system configuration.
7.
Press the RIGHT arrow key to enter the calibration menu.
8.
Press the UP arrow key to exit the menu.
Changing the Settings
When you select a sub-menu to enter, the controller will scroll
through settings pages at four (4) second intervals. When you
reach a menu with settings you want to edit:
1.
Press the ALT key
2.
Navigate to the setting to be changed
3.
Press the ENTER key and change the values
4.
Press the ENTER key to save your settings;
press the ESC key to cancel your settings
5.
Press the ESC key to continue scrolling
View Sensor Status
The current sensor readings can be readily displayed on the screen by
pressing the LEFT arrow key. The screen will flash between the sensor
readings and the current I/O status.
Press the UP arrow key to exit this mode.
NOTICE
Before placing the controller into RUN mode for the first time, enter all
of your desired set points, timer values and configuration options.
RIGHT >
DOWN V
LEFT <
System Menus
DANGER!
ALWAYS place your controller into STOP mode before powering it down.
This prevents the possibility of accidental equipment startup when powered back on.
Run / Stop Menus