© 2006-Present Agrowtek Inc.
www.agrowtek.com
| 200 N Anets Dr. Northbrook, IL 60062 | [email protected]
9
Timers
Repeat Cycle Timers
Cycle timers have an “on” time and an “off” time which you can specify in any amount between 1-9999 minutes. Setting an
“on” time of “02:00” and an “off” time of “05:00” will make the device run for two minutes and rest off for five minutes before
powering on again for another two minutes and so on.
Timer Settings & Options:
Timers can be configured to operate constantly, operate once or not operate at all based on the time values you enter.
To cancel a timer:
1.
Set the On time value to 00:00
2.
Set the Off time value to 99:59.
To operate once:
4.
Set the On time to any value equal or greater than 00:01.
5.
Set the Off time to 99:59.
To operate a timer continuously:
1.
Set the On time to 99:59
2.
Set the Off time to 00:00.
Lighting Duration Timer
When the controller is in lighting mode 2 or 3, the Lighting Duration
Timer is used.
Acceptable Values: 00:00 to 99:59
Lighting 24 Hour Timer
In lighting modes 0 and 1, lighting is operated based on the 24 hour lighting timer instead of the duration timer.
Setting the 24 hour lighting timer:
1.
From the “home” screen, press OK
2.
Scroll down to PARAMETERS and press OK
3.
Select HW01 and press OK
DO NOT change any other parameters or you will damage the functioning of the controller!
4.
Press OK to select channel A
Channels A-D operate the lighting equipment. Up to 4 different timers can be used on different day intervals to
control the lights.
5.
DY1 and DY2 are the days of the week that the timer is active.
Most applications only use one (1) 24 hour timer channel (Channel A) for the entire week (DY1 = MO, DY2 = SU.)
6.
Scroll down to the ON and/or OFF time values and press OK to edit the values. Use the Up/Down buttons to
change the values and press OK to accept the values or ESC to cancel.
7.
Press ESC until you reach the home screen.
WARNING
DO NOT set both time values to 0; this may cause damage to the controller!
Lighting Duration Timer for
Lighting Modes 2 & 3
Main Menu -> Timer Setup