background image

 

 

 

 

        

  PLEASE READ THIS MANUAL THOROUGHLY !

 

 

Thank you for having chosen AGROSE. 

The product you purchased has been designed and built with the greatest attention to  
the  safety  of  the  operator  and  the  environment,  never  the  less  there  are  still  some 
residual risks due to the nature of the product used. 

For this reason we recommend reading all of this manual to avoid making mistakes in 
the first period of use and to get the most out of the working life of the sprayer in time, doing the programmed 
maintenance at regular intervals. 

 

1. USING AND KEEPING THE USE AND MAINTENANCE MANUAL 

The manual is an integral part of the machine and should be kept in a safe place where 
it can be reached easily for consultation. 

 

1.1. COMPOSITION OF THE MANUAL 

This  manual  consists  of  various  parts  to  make  it  easier  to  consult  by  subject  and  to 
avoid repetitions; the following are part of the manual: 

a) Sprayers  

b) Pressure regulator (manual or electric) 

c) Optional accessories handbooks (marker, premix, cardan shaft, etc.) 

 

AGROSE reserves the right to make changes to the manual without prior warning and 
the normal printing cycles may vary slightly. 

 

1.2. GUARANTEE 

The enclosed card indicates the conditions of the AGROSE guarantee. The AGROSE guarantee covers the 
repair or replacement of parts considered manufacturing flaws, according to the unquestionable judgement 
of AGROSE, only after the authorized agent for that zone has verified the fault. 

Ambit  of  the  guarantee

:  The  guarantee  doesn’t  cover  cases  of  normal  wear,  negligent  use,  poor 

maintenance and/or improper use. 

The following materials subject to normal wear are not covered by the guarantee:

 gaskets and seals, 

diaphragms, seal rings, tubes and pipes, nozzles, pressure gauges, oil, tires, friction material of the clutches. 

Evident cases of negligence include

: work speed over that indicated in the spraying tables in the handbook 

(or too high for the conditions of the terrain), use of herbicide booms without an auto-levelling system or with 
the auto-levelling system blocked, power-takeoff speed over 540 rpm. 

Mounted  sprayers:

  activation  of  the  three-point  elevator  with  cardan  shaft  engaged  and  power-takeoff 

operational. And anything else indicated in the present Use and Maintenance Manual. 

Maintenance: 

The guarantee is void if the maintenance indicated in the tables in this manual 

isn’t respected, 

regarding the period and deadline of the interventions, washing the machine and the circuit at the end of the 
treatment. 

Improper use: 

The use the AGROSE machines are designed for is indicated in this manual, any other use 

is forbidden and makes the guarantee void. 

 

 

 

 

 

Summary of Contents for ATT-1000







































Reviews: