AGROSE ATT-1000, Owner'S Manual

Page: 18 / 38

14
4.6. PRESSURE REGULATOR
MTS-401 R MTS-100 BY MTS-50 R-3
To use the pressure regulator, follow the instructions in the enclosed handbook scrupulously. The
pressure regulator controls all of the most important spraying functions, the thorough knowledge of its
functions makes work easier and more precise.
The working pressure and the maximum pressure of the Sprayer are determined by the pressure regulator
which also protects the circuit from over pressure in any work conditions. (Inserious but very rare cases,
if the connecting pipes get blocked the pressure relief valve lets the pressure off)
In some setups there may be a pump that can reach a pressure of 50 bar controlled by a regulator
designed for 20 bar. In this case the maximum pressure that can be reached is 20 bar.
The regulators can be manual, mounted on the Sprayer or at a distance to make the controls easier to
use; or electrical with a control panel in the cabin.
The reare also regulator versions with mechanical remote controls with a cable.
MTS-100 BY CONTROL UNIT
MTS-50
1- On/Off the fans sides 2- Adjust Pressure
3- Delivery Water To Boom / Fan On Right Side 4- Delivery Water To Boom/Fan On Left Side
5- Manometer 6-Delivery Water From Pump To Control Units
7- Output (input)
PICTURE 10