INSTRUCTIONS FOR USE
AGP 1000 – 2000 PRO
Rev.02/2019
44
Figure 9.3
9.4
Nozzle holder for spraying tall crops
Figure 9.4
When standard nozzle holders cannot reach the required
spraying height because the fruit trees are too tall, the mist
blower can be equipped with nozzle holders for spraying
tall crops. These holders are equipped with nozzles and the
other side enables changing the nozzle range to a height of
up to 5 m using a control nozzle.
Because these nozzles are made for different spraying
requirements (range related), the angle of spraying is
narrower to reach greater distances, which also reduces the
quality of spraying.
Another disadvantage is also that the adjustment changes
the nozzle flow which means that it is theoretically
impossible to control the consumption of spray. This can
only be achieved by conducting practical tests.
The installation method for these holders is the same as for
the standard nozzle holders, which is why they can be
easily replaced.
WARNING: Be very careful when pumping from a pond because even a
moment of inattention can cause the water in it to be poisoned!
